Element DC5X^®

Best-in-Class Dry Chemistry Technology

There are two types of biochemistry testing systems for clinical testing: those utilizing liquid reagents and those that test based on dry reagents, which are easier to handle. Dry chemistry has been an accepted technology in medical laboratories for many years and numerous clinical evaluations have validated this technology against conventional wet chemistry analysis. Heska’s Element DC5X chemistry analyser is powered by FujiFilm technology and leverages more than 75 years of dry chemistry research and development. The state-of-the-art sample surface detection feature monitors air pressure changes and detects inadequate sample volume before the slide is wasted. Along with coated tips which prevent sample wicking and provide accurate delivery, the Element DC analyser brings advanced solutions to in-hospital chemistry testing.

No Interference from Lipemic Samples

Lipemia, haemolysis and icterus (hyperbilirubinemia) are common interferents in all clinical chemistry systems as shown below. Lipemia is the most common problem on liquid chemistry systems, because the turbidity associated with lipemia scatters light in the measurement of absorption by the reactant fluid.

Together, Heska and FUJIFILM are leading the way with technological advances that successfully eliminate lipemia as an interferent, while reducing the number of tests affected by icterus to a single parameter, and significantly decreasing the parameters impacted by haemolytic samples.

This is accomplished because the Element DC5X analyser uses reflectance (rather than absorbance) technology to measure the colour reaction. This, along with the slide sample spreading layer, reduces the effect of light scatter on the sample. In addition, electrolytes which are measured by potentiometry are not affected by interfering substances at all.

Automated Dilution

Not all patient chemistry parameters fall within the measurable range of an analyzer. When an absolute value is critical to a diagnosis, treatment plan, or prognosis, the auto-dilution feature on the Element DC5X analyser gives you the information you need.

In cases where patient results are above the analysers’ measurable limits you can quickly obtain a result by performing a dilution in a few simple steps:

1. Add your slides and sample tube.
2. Place a dilution cup and diluent (distilled water) into the analyser.
3. Add your tips.
4. Select your dilution factor.

The sample rerun feature on the Element DC5X analyser eliminates data re-entry; your previous patient number, sample ID and reference interval are recalled with the touch of a button.

No manual pipetting or re-calculation required; the auto-dilution feature on the Element DC5X analyser does it all — minimizing the chance of error. These fully automated steps ensure dilution results are reliable and allow you to focus entirely on your patients.

Dimensions